User Manual
Web Interface
After the device has successfully connected to your WiFi, you can access the web UI.
The web interface allows you to change various settings.
Either via http://physical-energy.local or via the IP address that you can find in your router.
LED Visualization
The LEDs show the energy flows and the device status.
Operational States
| LED State | Meaning |
|---|---|
| Rotating blue LED | Device is connecting to WiFi |
| Pulsing blue LEDs from the center | Setup mode –> device needs to be configured |
| Green cross | Settings applied successfully |
| Animated LEDs (colored) | Real-time energy flows |
Energy Flows
The LEDs visualize energy flows in real-time. All producers and consumers are connected with LED strips that illustrate the flow:
- Direction: The direction of the power is represented by the direction of the animated LEDs.
- Power: The faster the LEDs flow, the higher the power of the energy flow.
The battery charge level is also shown by LED indicators.
Troubleshooting
Device won’t connect to WiFi?
- The device will automatically return to access point mode
- Reconnect to the “physical_………” WiFi
- Check your WiFi credentials
LEDs show no data?
- Check the data source configuration in the web UI
Back to: Initial Setup